• Hey there! Welcome to TFC! View fewer ads on the website just by signing up on TF Community.

Axis AMEX PRIVILEGE Card is being offered LTF!!!

Ram1

TF Legend
VIP Lounge
Axis Amex privilege card with fees 1500 is being offered ltf.
For both Fresh and Upgrade applications.

Process for Upgrade
Open App
Click on 3lines at top left
Apply
Credit card
Check and apply axis amex privilege if fees shown 0

I applied and approved instantly. Its good ltf card to keep. Hurry up

Apply For This Credit Card: https://www.technofino.in/takeme/axis-tfc [linked added my team technofino]

1000032958.webp 1000032950.webp 1000032952.webp

Benefits
1000035135.webp
 
Last edited:
Axis open app right? I am not able to register in the axis app because the AMEX card has only 15 digits while the app needs a 16 digits and it also needs a CVV which the card doesnt have.
CARD has a CVV; it’s in front, a four-digit no.

You don’t need to register or anything; it will be automatically starting to show in your app once the card is issued. You do have a prior relationship with the bank, right?
 
Omg
Axis has to solve lot of issue for this card.
Write to pno immediately to add this card into axis authentication.
pno@axisbank.com
You know, in my case, the issue was strange. Since it was under my pre-approved section, I applied, and instantly the card was approved as usual. But what happened after was strange. Usually, after application, Axis just shows you the further details like date of dispatch status, etc. Then, when the card gets delivered, you have to enter those activation codes and full card details (digital) starts to show. And then you manage limits and set up a PIN, etc. But in my case, they immediately started to show the digital card (not full details though), no need for an activation code. In fact, I changed the PIN and set the limits, etc., before the delivery of the card. I didn’t even use the activation number. 😆
 
You know, in my case, the issue was strange. Since it was under my pre-approved section, I applied, and instantly the card was approved as usual. But what happened after was strange. Usually, after application, Axis just shows you the further details like date of dispatch status, etc. Then, when the card gets delivered, you have to enter those activation codes and full card details (digital) starts to show. And then you manage limits and set up a PIN, etc. But in my case, they immediately started to show the digital card (not full details though), no need for an activation code. In fact, I changed the PIN and set the limits, etc., before the delivery of the card. I didn’t even use the activation number. 😆
this is common bro.
If axis marks ur card as delivered, then no need of activation code. U can directly set pin and limits.
System might have wrongly updated as delivered before delivery.

My card delivered at 4pm and axis marked delivered at 6pm. I set pin and limits without any code.
 
Back
Top